Export 35 results:
Filters: Author is Nelson Lam
The Selection and Scaling of Ground Motion Accelerograms for Use in Stable Continental Regions. Journal of Earthquake Engineering (2021). doi:https://doi.org/10.1080/13632469.2021.1913456
Shear Wall and Frame Dual Systems Featuring Discontinuous Load Paths in Frame Elements in Low-to-Moderate Seismic Regions. Journal of Earthquake Engineering (2021). doi:https://doi.org/10.1080/13632469.2021.1964643
An Adaptive Ground Motion Prediction Equation for Use in Low-to-Moderate Seismicity Regions. Journal of Earthquake Engineering 1-23 (2020). doi:https://doi.org/10.1080/13632469.2020.1784810
A Computational Tool for Ground‐Motion Simulations Incorporating Regional Crustal Conditions. Seismological Research Letters (2020). doi:https://doi.org/10.1785/0220200222
Final report on vulnerability of as-built and retrofitted LDRC buildings. (Bushfire and Natural Hazards CRC, 2020).
Modeling of Seismic Actions on Earth Retaining Structures. Recent Advances in Computational Mechanics and Simulations 103, 247-256 (2020).
Cost-Effective Mitigation Strategy Development for Building Related Earthquake Risk Annual Report 2017-2018. (Bushfire and Natural Hazards CRC, 2019).
Development of Cost-effective Mitigation Strategy for Limited Ductile Reinforced Concrete Buildings. Australian Earthquake Engineering Society 2019 Conference (2019). at <https://aees.org.au/wp-content/uploads/2019/12/55-Raneem-Alazem.pdf>
Framework for seismic vulnerability assessment of reinforced concrete buildings in Australia. Australian Journal of Structural Engineering 20, 143-158 (2019).
Predicting Maximum Displacement Demand of Asymmetric Reinforced Concrete Buildings. Australian Earthquake Engineering Society 2019 Conference (2019). at <https://aees.org.au/wp-content/uploads/2019/12/43-Elisa-Lumantarna.pdf>
Prioritisation strategy for seismic retrofitting of reinforced concrete buildings in Australia. Australian Earthquake Engineering Society 2019 Conference (2019). at <https://aees.org.au/wp-content/uploads/2019/12/21-Bin-Xing.pdf>
Progress report on costing of limited ductile reinforced concrete buildings. (Bushfire and Natural Hazards CRC, 2019).
Report on fragility curves for limited ductile reinforced concrete buildings. (Bushfire and Natural Hazards CRC, 2018).
Analytical modelling of podium interference on tower walls in buildings. Australian Journal of Structural Engineering 18, (2017).
Assessment of Displacement Demand for Earth Retaining Structures. Australian Earthquake Engineering Society (2017). at <http://www.aees.org.au/wp-content/uploads/2018/02/453-Rohit-Tiwari.pdf>
Cost-effective mitigation strategy for building related earthquake risk: annual project report 2016-17. (Bushfire and Natural Hazards CRC, 2017).
A design spectrum model for flexible soil sites in regions of low-to-moderate seismicity. Soil Dynamics and Earthquake Engineering 92, 36-45 (2017).
. Effects of podium interference on shear force distributions in tower walls supporting tall buildings. Engineering Structures 148, (2017).
Methods of structural analysis of buildings in regions of low to moderate seismicity. 2017 World Congress on Advances in Structural Engineering and Mechanics (2017).
Methods of Structural Analysis of Buildings Incorporating Higher Modes Effects. Australian Earthquake Engineering Society 10 (2017). at <http://www.aees.org.au/wp-content/uploads/2018/02/463-Alireza-Mehdipanah.pdf>
RC walls in Australia: reconnaissance survey of industry and literature review of experimental testing. Australian Journal of Structural Engineering 18, (2017).
A refined design spectrum model for regions of lower seismicity. Australian Journal of Structural Engineering 18, (2017).
Analytical Simulation of Limited Ductile RC Beam-Columns. (2016). at <https://www.aees.org.au/wp-content/uploads/2018/06/331-Alireza-Mehdipanah-et-al.pdf>
Displacement Based Design of Bridge Abutments. Australian Earthquake Engineering Society (2016). at <https://www.aees.org.au/wp-content/uploads/2018/06/337-Tiwari-et-al.pdf>